Jaguar & Land Rover KVM Repair in Dallas–Fort Worth
Mobile Service Across Dallas–Fort Worth
On modern Jaguar and Land Rover vehicles the KVM — keyless vehicle module — is the gatekeeper for smart-key recognition. A failed or de-programmed KVM leaves the car insisting no smart key exists, however healthy the fob may be. We diagnose and program KVMs and JLR smart keys at your location across DFW.
Quick Answer
As of July 2026, Jaguar and Land Rover KVM work in Dallas–Fort Worth runs $150–$450 for diagnosis and key programming and $250–$700 when the keyless module itself needs replacement and marriage, through our mobile service — the smart-key-not-found tow to the dealer usually is not necessary. Call (817) 813-8746 with your VIN for a firm all-in quote.
Typical DFW Pricing
| Service | Typical range | Notes |
|---|---|---|
| Module programming / configuration | $150–$450 | Existing unit, flashed to your VIN |
| Replacement or used module, VIN-matched | $250–$700 | Sourcing plus programming |
| Diagnostic visit | $95–$185 | Often credited toward the repair |
Fob, Antenna or KVM?
Three links can break: the fob itself, the antenna network that listens for it, or the KVM that arbitrates. Replacing fobs against a failed KVM wastes money in the wrong direction — the diagnostic reads the module and answers it in one visit.
How It Works
Call With Your VIN
Every module and security job is VIN-specific. Tell us the year, model and symptoms, and we confirm coverage and quote before anyone is dispatched.
Diagnose First, Then Fix
We confirm which module or system is actually at fault before selling you a repair — a large share of “failed module” calls turn out to be a credential, connector or configuration problem that costs far less.
Programmed, Tested, Done On Site
Programming happens at the vehicle with manufacturer-level software and stable voltage, followed by a full function test before we leave.
The Honest Boundary
The honest edge: JLR’s newest platforms tighten security channel by channel, and an occasional late VIN needs the dealer’s online session for first keys. We identify those cases from the VIN in the first phone call. For the rest of the fleet — the bulk of what drives DFW — KVM diagnosis, key programming and module marriage happen at your location.
Frequently Asked Questions
New battery in the fob and the Range Rover still cannot find it — now what?
Try the manufacturer’s backup position first (fob against the column or in the marked pocket). If that fails, the KVM or antenna path is suspect, and it is diagnosable at your driveway.
Can you program keys to a replacement KVM?
Yes — on most model years the module is married to the vehicle and keys registered in the same session. The newest platforms can be more restrictive; we confirm by VIN before dispatch.
Is this dealer-only work?
For a large share of JLR model years, no. When a specific generation genuinely is, you hear it from us on the first call, not after paying for a visit that was never going to succeed.
Both fobs died the same week — coincidence or KVM?
Two fobs failing together points hard at the receiver side — KVM or its antennas — rather than at simultaneous fob deaths. That distinction is exactly what the diagnostic resolves before any hardware is bought.
My Land Rover intermittently cannot find the key on rainy days — really weather-linked?
Moisture intrusion into an antenna or the KVM connector produces precisely that correlation. It is findable, fixable and much cheaper than the module the symptom seems to demand.
Range Rover was stolen and recovered — can you re-secure it?
Yes: we deactivate every credential the thief may have captured, program fresh keys, and verify the KVM holds only your new set. Re-securing recovered vehicles is a service we take particular care with.
Related: Jaguar keys · Land Rover keys · immobilizer repair.
Call (817) 813-8746 — mobile across the whole Metroplex, one all-in quote before we roll.