SAAB REPLACEMENT KEY PROGRAMMING
No KEYS? No PROBLEM.
LOST KEYS, STOLEN KEYS REMOVED, SPARE, BENT, BROKEN KEYS AND REMOTES REPLACED.
How do you start a Saab 9-3 or 9-5 without the keys?
It's pretty hard. The keys include a complex engine immobiliser system coded to the car. If you have lost all keys you may need to replace the locks, immobiliser and alarm systems. It gets expensive. Up to now it is normal to replace theTwice or CIM module if you lost all your keys to your Saab and have a dealer to programme a new one into your car at considerable cost, including recovery.
We no longer have to do this. We can re-use your old MODULE and code in new keys or remove the stolen ones on the bench And cut a key to your existing locks by return post.
All you have to do is send us the Twice module (or we can go to your vehicle) which is located under the passenger seat under the carpet we will return it with a programmed chip to insert into your existing key and a key cut to your code if its a total lost key (if required) ready to plug back in and start the vehicle.
Saab Twice module Saab 9-3, Saab 9-5 (Earlier Models)
We have the equipment to professionally add new keys to all newer Saab 93s (2003+) that are equipped with the CIM immobilizer unit.
WHEN ALL KEYS ARE LOST if your keys have been stolen then we can remove the stolen keys, preventing the old key from starting the car.
We can now also use second hand remote Box keys fully working remote and key.
Saab Cim Module Saab 9-3,9-5,Cadillac (Later Models)
If you are not familiar with our company and your first contact with us is online: We would be pleased to hear from you! Please let us know what your needs and questions are, we are more than happy to help.
Garage service Send us your customer’s Twice or CIM module. (CIM removal instructions available by email please ask).
We will match up a chip to it and cut the emergency blade with the key code you provide if required obtainable for a small fee.
We Post it back to you recorded within 2 business days. (Typically next day.)
You reinstall it into your car or customer’s car, and start it with the FOB we provide. It’s that simple.
You just PLUG and DRIVE. No additional programming is required.